How Much Does Painted Aluminum Coil Weigh? Weight Formula & Charts (Metric + Imperial)

How Much Does Aluminum Coil Weigh?

Every gutter contractor, fabricator and freight forwarder eventually asks the same question: how much does a coil of painted aluminum actually weigh? The answer decides your freight quote, your warehouse floor loading, whether your forklift can pick it up, and — if you buy by the foot and sell by the tonne — your margin. This guide gives you the formula, a ready-to-use weight chart for common gauges and widths, and the three details (coil OD, alloy, coating) that quietly change the number by ±5%.

The Weight Formula: One Line Does Everything

Aluminum coil weight comes from a single equation:

Weight (kg) = Length (m) × Width (m) × Thickness (mm) × Density

where density for common aluminum alloys is:

Alloy SeriesDensity (kg/m³)Notes
1100 / 1xxx (pure Al)2,710Purest, lightest
3003 / 3005 / 3105 (Al-Mn)2,730Standard for gutter and roofing coil
5052 (Al-Mg)2,680Higher strength, slightly lighter

Per-unit shortcuts for quick mental math:

  • kg per square metre = thickness (mm) × 2.71 (for 3xxx alloys; × 2.73 including standard coating). A 0.7 mm coil: ≈ 1.90 kg/m².
  • Weight per foot (North America) = thickness (inches)² × width (inches) × 12.1 lb for 3xxx alloys — or just use the chart below.

Painted Aluminum Coil Weight Chart (Metric)

Weights below are theoretical for 3xxx alloy with a standard PVDF coating (~2.73 kg/m³ effective). Multiply by coil length to get total weight.

Thicknesskg per m²1,000 mm wide (kg/m)1,220 mm wide (kg/m)1,250 mm wide (kg/m)
0.5 mm1.371.371.671.71
0.6 mm1.641.642.002.05
0.7 mm1.911.912.332.39
0.8 mm2.182.182.662.73
1.0 mm2.732.733.333.41
1.2 mm3.283.284.004.10

Painted Aluminum Coil Weight Chart (Imperial — Gutter & Roofing Gauges)

For North American buyers working with decimal-inch gauges, per-foot weights for the most common coil widths:

Thickness11.75″ blank (lb/ft)15″ blank (lb/ft)16″ blank (lb/ft)20″ blank (lb/ft)
0.019″0.520.660.710.89
0.024″0.650.830.891.11
0.027″0.730.941.001.25
0.029″0.791.011.081.34
0.032″0.871.111.191.48
0.040″1.091.391.481.86

Worked example: a full pallet order of 0.032″ × 11.75″ coil for a 5K gutter run — 500 m (1,640 ft) weighs roughly 650 kg (1,433 lb) of metal, plus about 15 kg for the steel core and wooden cradle. That is a two-person lift without a forklift — plan your unloading accordingly.

Why Your Scale Might Disagree by ±5%

Calculated weight is theoretical. Real delivered weight differs for three legitimate reasons:

1. The Coil Core and Packaging

A standard steel core (508 mm ID) weighs 8–12 kg depending on gauge; the export cradle and moisture-barrier packaging add 10–20 kg. Freight invoices bill gross weight — always confirm whether a quotation is net coil weight or gross shipping weight.

2. Thickness Tolerance

Mills roll to tolerance, typically ±0.01–0.02 mm on coil. A full tonne of “0.7 mm” coil delivered at 0.71 mm weighs 1.4% more metal — and at LME-driven pricing, you pay for exactly what you receive. Over-tolerance metal is not a defect; it is how rolling works. If a budget is thickness-sensitive, agree a tolerance class in the contract.

3. The Coating Layer

A 25 μm PVDF system adds roughly 0.07 kg/m² — under 4% on a 0.7 mm coil. Theoretically the paint weight is priced into the coating fee, but on big orders it shows up on the scale. Ignore it for estimates, include it for verification weighing.

Weight Is Money: Three Practical Consequences

Freight Planning

Ocean freight for coil is billed by weight or volume, whichever earns more. Painted coil is dense, so weight governs: a 20-ft container legally maxes out around 24–26 tonnes of payload. In practical terms, that is roughly:

  • ≈ 12,000 m² of 0.5 mm coil, or
  • ≈ 8,500 m² of 0.7 mm coil, or
  • ≈ 6,700 m² of 0.9 mm coil.

If your order sits just over one container, ask your supplier to quote “as per loading plan” — a mill that strips coils and re-packs tightly can sometimes fit the same tonnage into fewer containers. Our price guide covers how freight terms change the invoice.

Buying by Length vs Buying by Weight

Gutter contractors buy length (feet of finished gutter) but pay for weight. This is exactly why thickness matters so much to your margin — every 0.003″ of gauge adds ~11% to your metal cost per foot. The full gauge comparison is in our 0.027 vs 0.029 vs 0.032 gutter coil guide.

Warehouse and Handling Safety

Floor loading and forklift capacity are weight questions: a full jumbo coil of 1.2 mm × 1,250 mm × 2,000 m runs about 8.2 tonnes — beyond most shop forklifts. Know the weight before it ships, and tell your warehouse team what is coming.

Quick Reference: Common Coil Order Weights

ProductSpecTypical Coil LengthApprox. Net Weight
Gutter coil (5K)0.027″ × 11.75″500 m≈ 530 kg
Gutter coil (6K commercial)0.032″ × 11.75″500 m≈ 630 kg
Roofing coil0.8 mm × 1,000 mm1,000 m≈ 2,180 kg
Facade panel stock1.0 mm × 1,220 mm1,000 m≈ 3,330 kg
Jumbo mill coil1.2 mm × 1,250 mm2,000 m≈ 8,200 kg

Frequently Asked Questions

How do I calculate the weight of aluminum coil?

Multiply length × width × thickness × density. For 3xxx series painted aluminum, density with standard coating is about 2.73 kg/m³. In metric: kg = length(m) × width(m) × thickness(mm) × 2.71, then add ~1% for coating. In imperial: lb = thickness(in) × width(in) × length(ft) × 0.101 per inch of thickness per ft²… or simply use the charts above.

How much does a 500-foot roll of gutter coil weigh?

0.027″ × 11.75″ gutter coil at 500 ft (152 m) weighs about 125 kg (275 lb) net. The same length in 0.032″ weighs about 145 kg (320 lb). Add 5–8 kg for the core and packaging.

How much does aluminum weigh per square metre?

Multiply thickness in mm by 2.71. So 0.7 mm aluminum is 1.90 kg/m², 0.8 mm is 2.17 kg/m², and 1.0 mm is 2.71 kg/m² — before adding the coating layer.

Does the paint coating change the coil weight much?

Not much: a standard PVDF system adds roughly 0.07–0.09 kg/m², about 3–4% on a 0.7 mm coil. The bigger verification factors are the steel core (8–12 kg) and packaging (10–20 kg per coil).

How many tonnes fit in a 20-foot container?

Painted aluminum coil is weight-limited, not volume-limited: plan on 24–26 tonnes of payload per 20-ft container depending on road limits at destination. Ask your supplier for a loading plan — coil orientation and blocking affect the final number.

Getting Weights and Prices That Match Your Order

Weight math is the difference between a freight surprise and a clean landing. When you request a quotation from Yatai Aluminum, we state net coil weight, gross shipping weight and loading plan for your exact specification — alloy, gauge, width and length — so your freight forwarder and your accountant both get real numbers. Send us your sizes and destination port, and we will quote with the weights calculated, not estimated.

One comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Share this :
Fill in your details and we will contact you.

Latest Post

Roller Coated Aluminum Coil: Inside the Coil Coating Line

How roller coated aluminum coil is actually made: pretreatment, three-roll application, PMT curing, the line speed trade-off, one-side vs two-side coating, and the line data that proves coating quality.

How to Vet a Prepainted Aluminum Coil Manufacturer

A 12-point factory audit for prepainted aluminum coil buyers: how to tell a coil coating mill from a slitter or trader, which documents to demand per shipment, a three-stage sample protocol and the red flags that predict coating failure.

Color Coated Aluminum Coil: What It Means and Coil vs Sheet

Color coated, prepainted and painted aluminum coil are one product under many names. What the terms hide, coil vs sheet formats, coating systems, color control and a spec template.

Free Sample Request

Fill in your details and we will contact you shortly to arrange your free sample delivery.

Step 1 of 3
m²
m
mm
Max thickness: 3.0 mm
mm
Max width: 2780 mm
Max width: 2780 mm
%
Please enter only one value. Area / Weight / Length
Weight 0 ton
Area 0 m²
Length 0 m
Coils 0 pcs