How Painted Aluminum Coil Is Packed and Shipped: Export Packing and Container Loading Guide

Why Packing Decides Whether Your Coil Arrives Saleable

Aluminum coil can survive a cyclone at sea and still be ruined by a badly built cradle. The metal is not fragile — but it is vulnerable in three specific ways: edge damage from handling and stacking, moisture damage from condensation inside the wrap, and deformation from unsupported coil weight. Every one of those failures happens in the gap between the coating line and your warehouse, which is exactly the gap this article covers.

Here is how export-grade painted aluminum coil should be packed, how many tonnes actually fit in a container, and what to check in your supplier’s packing specification before the vessel sails.

How Painted Aluminum Coil Is Packed for Export

A properly packed export coil has six layers of protection, working from the metal outward:

  1. Edge protection — plastic or cardboard edge rings on both coil faces, preventing the coil edge from nicking adjacent wraps and from deforming under the sling.
  2. Inner and outer wrap — VCI (vapour-corrosion-inhibitor) film against the metal, then a moisture-barrier film. The VCI layer is what prevents white rust forming in the humid air inside a container crossing the equator.
  3. Desiccant — silica gel sachets placed inside the wrap, sized to the coil surface area and voyage duration. Reputable mills can show the desiccant calculation; some simply drop in a handful.
  4. Hardboard or plywood face protection — flat boards protecting the coil’s flat faces from impact.
  5. Steel strapping — circumferential and radial bands at defined intervals, with edge protectors where straps cross the coil edge. Strapping tension matters: too loose and the wrap abrades; too tight and it deforms the coil.
  6. Wooden cradle or pallet — the base that carries the load. This is the part most often under-built: an export cradle should carry the full coil weight with eye bolts sized for lifting the entire assembly, and be heat-treated (ISPM-15) for international shipment.

Eye-to-Sky vs Eye-to-Wall: The Loading Decision

Coils ship in one of two orientations, and the choice affects packaging, weight per container and how you unload:

OrientationAdvantagesDisadvantagesBest For
Eye-to-sky (axis vertical)Highest weight per container; coil sits on its full face; less lashing requiredRequires a crane or overhead lift to unload; coil cannot be rolledLarge orders, receivers with crane capacity
Eye-to-wall (axis horizontal)Easy forklift handling; coils can be rolled short distances; no crane neededCoil rests on its edge — needs cradles; slight weight penalty from lashing spaceSmaller orders, receivers without a crane

Decide this with your supplier before the order ships, not after. If your warehouse has no overhead lifting, an eye-to-sky container is a delivery day crisis.

How Much Coil Fits in a Container

Painted aluminum coil is weight-limited, not volume-limited — you hit the payload ceiling long before you fill the box. Practical planning figures:

ContainerMax Payload (practical)Coil Tonnage to Plan
20 ft standard24–26 tonnes22–25 tonnes
40 ft standard26–28 tonnes23–26 tonnes
40 ft high cube26–28 tonnes23–26 tonnes

Two surprises for first-time buyers: a 40-ft container does not carry twice a 20-ft container’s weight — road limits at destination cap both at roughly 26 tonnes; and the practical tonnage is always below max payload because lashing, dunnage and cradle weight count against you.

To convert tonnage into product, use our coil weight charts: a 20-ft container holds roughly 8,500 m² of 0.7 mm coil, or 12,000 m² of 0.5 mm coil, or 6,700 m² of 0.9 mm coil.

Inside the Container: Securing the Load

  • Weight distribution — heavy coils over the container floor beams, not concentrated over the axle area. Uneven loading causes floor failure and container rejection by the carrier.
  • Lashing — polyester or steel straps to the container’s lashing rings, with timber blocking against fore-aft movement. Sea motion applies much larger longitudinal forces than most shippers assume.
  • No metal-to-metal contact — dunnage or rubber between coils and between coil and floor prevents abrasion and galling.
  • Air gaps — a small gap between coils allows condensation to drain rather than accumulate. Paradoxically, over-packing tightly can increase moisture damage.

Moisture: The Real Enemy in Ocean Transit

A steel container crossing from a Chinese port to Rotterdam can experience a temperature swing of 40 °C. That cycle drives water in and out of the air inside the box, and condensation forms on the coolest surface — which, on a painted coil, is the metal inside the wrap. Three defences matter:

  1. VCI film — releases corrosion-inhibiting vapour that forms a molecular layer on the aluminum.
  2. Container desiccant bags — typically 1–3 kg of calcium chloride desiccant hung inside the container, in addition to the coil’s own desiccant. This is the step that most often gets skipped when buyers negotiate packaging to reduce cost.
  3. Dry container verification — confirm the container is not a “sweating” box (a container that previously carried wet cargo). Ask for the container number and check it has a valid CSC plate.

If your coils arrive with white rust or interleaving stain, the cause is almost always inside this section — and it is a claim, not a fact of life.

What to Check Before the Container Leaves

Ask your supplier for these items with the shipping documents. A mill that supplies them routinely is a mill that has handled claims before:

  1. Packing photograph set — coil before wrapping, during wrapping, and the secured container interior. This is the single most useful document if a claim arises.
  2. Desiccant specification — type and quantity per coil and per container.
  3. Cradle ISPM-15 heat-treatment certificate — required for wood packaging into the EU, US, Australia and many other markets. Missing this can hold your container at customs at your cost.
  4. Net and gross weight per coil, plus total — matched against your order.
  5. Loading plan / stowage diagram — showing orientation, position and lashing.
  6. Container number and seal number — verify against the bill of lading.

Storage After Arrival: Keeping It Saleable

  • Indoors, flat, on dunnage — never directly on concrete, never standing on edge unsupported.
  • Do not stack coils directly on each other without interleaving protection; pressure marks appear on the lower coil’s coated surface.
  • Open the wrap only when you are ready to fabricate — the wrap is the moisture barrier. A coil opened in a humid warehouse and left for a month will develop edge corrosion.
  • FIFO discipline — aged stock with broken wrap is where most “the mill sent us bad coil” complaints actually originate.

Frequently Asked Questions

How is aluminum coil shipped in containers?

Coils ship either eye-to-sky (axis vertical, loaded with a crane) or eye-to-wall (axis horizontal, on cradles, forklift-friendly). They are wrapped in VCI film plus moisture barrier with desiccant, strapped, and lashed to the container’s lashing points with timber blocking to prevent fore-aft movement.

How many tonnes of aluminum coil fit in a 20-foot container?

Plan on 22–25 tonnes of painted coil in a 20-ft container. Theoretical max payload is 24–26 tonnes, but cradle weight, dunnage and lashing reduce the practical figure. A 40-ft container carries roughly the same weight — coil is weight-limited, not volume-limited.

Why does painted aluminum coil arrive with white rust?

Condensation inside the packaging during ocean transit. Preventable with VCI film, correctly sized desiccant inside the coil wrap, container desiccant bags, and a dry container. White rust is a packing failure, not an inevitable consequence of sea freight.

What is ISPM-15 and why does it matter?

An international standard requiring heat treatment of wood packaging material to prevent pest transfer. Coils shipped on untreated wooden cradles can be refused or fumigated at destination at the buyer’s cost. Always request the heat-treatment certificate.

Can I unload a container without a crane?

Yes, if the coils are packed eye-to-wall on cradles — a forklift can handle them. Eye-to-sky loading requires overhead lifting. Tell your supplier your unloading capability before the order is packed.

Packaging as Part of the Specification

Packing is not a logistics detail to be optimized at the last minute; it is the part of the specification that determines whether the quality you paid for survives the voyage. Specify the six protection layers, the loading orientation, the desiccant quantity and the ISPM-15 certificate in the purchase order — and require the packing photographs with the shipping documents.

Yatai Aluminum exports painted aluminum coil on export-grade heat-treated cradles with VCI film, sized desiccant and container desiccant bags as standard, and issues a photographic packing record with every shipment. Tell us your destination port, container preference and unloading capability, and we will propose a packing and stowage plan matched to it — including the weights you need for your freight booking.

Leave a Reply

Your email address will not be published. Required fields are marked *

Share this :
Fill in your details and we will contact you.

Latest Post

PE Coated Aluminum Coil: When Polyester Is the Right Call

PE coated aluminum coil from the mill side: the three polyester grades sold under one name, where PE is genuinely the better answer, where it quietly costs you, and the tests that separate a good PE system from cheap stock.

PVDF Coated Aluminum Coil: What to Check Before You Buy

PVDF coated aluminum coil written from the coating side: what 70% resin really means, where the spec gets gamed, why the oven cure matters more than the paint, and the tests worth demanding per lot.

Aluminum Daily Price Report: LME & SHFE – 17 Nov 2026

Daily aluminum price reference for 17 November 2026: LME cash offer jumps 5.76% to $3,332/t while 3-month holds at $3,020/t, a $312 prompt premium, LME stocks down 0.97% and what it means for painted aluminum coil buyers.

Free Sample Request

Fill in your details and we will contact you shortly to arrange your free sample delivery.

Step 1 of 3
m²
m
mm
Max thickness: 3.0 mm
mm
Max width: 2780 mm
Max width: 2780 mm
%
Please enter only one value. Area / Weight / Length
Weight 0 ton
Area 0 m²
Length 0 m
Coils 0 pcs