You See the Whole Line.
We Check Every Coil.
Fourteen stations, four quality gates, one file per coil. Nothing hidden between the raw aluminum and your site.
2780mm
Asia’s Widest Production Line
Patented 4-Roll Coating
145+
inspection points in the system
100%
on-line thickness & colour check

01 · Material
Confirm material and order requirements.
02 · Preparation
Prepare the surface for coating.
03 · Coating & Curing
Control the coating process and curing conditions.
04 · Finishing
Check appearance and required dimensions.
05 · Final Inspection
Review applicable results before release.

Raw Material Inspection
Every incoming aluminum coil is inspected before entering production to ensure consistent material quality.
- Thickness & Width
- Weight & Quantity
- Surface Quality
- Alloy & Temper Verification
- Tensile Strength
- Chemical Composition

Coating Quality Inspection
Every coating stage is checked in real time to ensure paint consistency, adhesion and a flawless surface.
- Paint Color & Batch Verification
- Dry Film Thickness
- Surface Gloss
- Color Difference
- MEK Rub Resistance
- Pencil Hardness

In-Process Production Control
Every production stage is monitored and adjusted on the line to stop defects before they pass downstream.
- Alloy & Specification Verification
- Thickness & Width Measurement
- Conversion Coating Ratio
- Cleaning & Water Break Test
- Ink Color & Viscosity
- Coating Oven Temperature

Final Product Inspection
Every finished coil is fully tested before release to confirm it meets all performance and appearance standards.
- Dry Film Thickness
- Gloss & Color Difference
- MEK Rub & Impact Resistance
- Cross-Cut Adhesion
- Bend Test
- Thickness & Width

Packaging & Shipment Inspection
Every outgoing product is checked before dispatch to ensure safe delivery and complete documentation.
- Finished Weight
- Finished Meterage
- Pallet Condition
- Certificate Placement
- Surface Appearance
- Rewind Alignment
The Sample Becomes Your Production Reference.
Sampling is more than approving a colour. It establishes a reference that can be recorded and checked again when the order moves into mass production.
STEP 01
Confirm the Reference
STEP 02
Record Key Parameters
STEP 03
Compare During Production
STEP 04
Keep the Reference
99% Color Accuracy in Sampling.Consistent from Sample to Production.
Customer Sample ↓
↓ Yatai Sample


Colour reference
Coating system
Material specification
Thickness & width
Applicable process settings
Give Us a Coil ID. We Retrieve It All.
Eight documents travel with every coil. Name the coil, and any of these is retrievable.
Mill Test Certificate
Alloy, temper, thickness, heat number.
Certificate of Analysis
DFT, ΔE, gloss, adhesion per coil.
Coating & oven log
Line speed, oven profile, PMT, operator.
Paint batch record
Batch No., TDS, SDS, colour master.
Inspection report
All test results against the coil ID.
Release approval
Authorised signature before dispatch.
Loading record
Photos, quantity, pallet and crate ID.
Test reports
Third-party: SGS / Intertek on request.